Maxpeedingrods Coilovers Shock Kits for Nissan 350Z 03-2008 for Infiniti G35 03 - 2006 Height Adj. Coil Spring Absorbers

Introduction

MXR-SNA coilovers are designed as an entry level for street use. It features with full length height adjustable and adjustable camber plates (applicable for some vehicles),  which offers you a lowered stance, improved performance  for your daily use vehicle.

Application

For NISSAN 350Z coupe  2003-2008 USA (Z33)   

For NISSAN 350Z ROADSTER convertible 2003-2008USA (Z33 ) 

For INFINITI G35 COUPE 2003-2007USA  (V35) RWD

For INFINITI G35 SEDAN 2003-2006USA  (V35) RWD 

Note: (not for G35X sedan)

Specification

Top mounts: pillow ball top mount front and rear.

Damping: No adjustable damper force

Front Spring Rate: 10kg/mm (560 lbs/in).

Rear Spring Rate: 7kg/mm (392 lbs/in).

Adjustable Height: Yes lowering 1" to 3".

Shock type: Twin tube.

Spring Preload: 7-10 mm.

Color: blue

Package included

Complete coilovers 2 front and 2 rear,a pair wrench for height adjustment.

Dimension

Gross weight: 24.6kg

Package size: 71*52*21cmc

Feature

1. Lowered height adjustment from 1" - 3" which allow lower center of gravity and also add a more aggressive stance.

2.Pillow ball top mount - It improves the steering feel and response.

3. Twin-Tube structure allows sufficient stroke within the shock absorber.

4. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation.

5. Separate height adjustment does not affect damper stroke.

6. Height can be adjusted with coilovers installed on the vehicle.

7. High Tensile performance spring - STRESS TESTED OVER 600,000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability and performance.

8. Height Adjustment tools included. 

9. Full rebuildable.

• Fitment: The shock absorbers are compatible for Nissan Fairlady Z 350Z Z33 2003-2008, for Infiniti G35 coupe/Sedan 2003-2006
• High-quality Spring: Front: 10 kg/mm (560 lbs/in), Rear: 7kg/mm (392lbs/in); The spring distortion is less than 0.04% under 600,000 times continuously tests
• Adjustable Performance: Adjustable ride height (lowering 0-60mm); Adjustable pre-load spring tension;
• Increased Hardness: Most components of the suspension parts are made from 6061 aluminum with T6 for increased strength and rigidity
• Pillow ball top mount: Pillow ball bearing top mounts for camber adjustment are designed to combat noise while tuning and offer greater feed back